buyers guide to home theater projectors - lcd projector for classroom

Over the years, I have become more and more interested in my home theater system.
I have to say that in all the rooms in the house, my own little cinema is something I can't have.
I like my home theater system very much and I'm sure you will love you too if you are like me.
When I started building my system, I found that there was too much information to absorb.
Every product there seems to be better than the next one, and I find myself not sure which one to buy.
Here are some things to remember when buying a new home theater projector.
There are two main types of projectors on the market; DLP and LCD.
DLP represents digital light processing.
It was invented by Texas Instruments and uses a miniature array of more than 2 million mirrors.
The contrast of DLP is higher than the LCD, but there are some adverse consumer reports that point to the so-called "rainbow effect ".
When looking at the other side from one side of the screen, the "rainbow effect" is obvious and characterized by a sudden burst of color.
LCD represents LCD display.
There are three different glass LCD panels inside these projectors;
Each component of the video signal is 1 (
Red, green, blue).
When the DLP chip reflects light, the LCD panel allows light to pass through them.
The LCD projector can produce brighter images and is known for its excellent color saturation.
In the end, you will be hard
Press to notice the huge difference between the two projection systems.
When you buy a new projector, put your special needs at the forefront of your idea.
As I mentioned above, it's really easy to get lost in the details of each particular system.
Connection is definitely something to pay attention.
Make sure you can connect all the components, including the game system.
There's nothing better than playing Halo in reality. life size!
The proportion of contracts is another important factor;
The higher the ratio, the better the picture will be.
The brightness of the projector is another issue to consider.
ANSI for optical output (
National Standards Association of Americalumens.
You will want to avoid generating any projector below 1000 lumens.
As you may know, the projection resolution is very important.
This refers to the number of pixels that can be displayed on the screen.
Choose content no less than 1024x768 as this will allow you to fully appreciate the depth and quality of your HDTV.
In the end, you should purchase a projector that meets your needs and budget.
The soprano is about to begin now! Time to go! ©2006 -