A Professional Manufacturer of Smart Interactive Screens For More Than 10 Years
You need a level and pencil for this step.
It's kind of like a project for two people, so grab a friend, family, or you can try to do it yourself, I did, but it takes longer.
What you need to do is find the position at the bottom of the screen and then 87 "at the bottom "(
Make sure it's level)
Your vertical line is 49 "(
Again make sure it's level and exactly 90 degrees with your bottom line)
This will be the size of your screen.
In this step you need: batten wood, painting, sanding machine.
Many people say that wooden planks are not available. I just made up the word, but people say that this cannot be done.
I do not agree that this is not possible if you do not use a circular Sander.
So, when you get your batten wood, let's get started and you'll notice it's not straight, it's OK, the Batten is not Batten.
First Polish your wood until smooth
Only one side needs to be polished)
Now, put your Batten under the pencil marker.
Remember that the Batten is not straight, so put the batten on the line until it starts to bend, then mark it and cut it, and don't discard the wood on the left, just put it next to cut it out of your work and move on until you finish the first level.
You nailed it to the wall.
This step requires a power outage cloth, a tack and a DingTalk/DingTalk gun, and a power outage is a special type of curtain backing.
They use it in hot curtains that reflect light.
You need 92 by 54, or as long as it's longer than your base frame, "I used a dual reputation because of the WII and XBOX 360 motion sensors ".
Now put your stud on the screen and remove the wrinkles.
Now, just pin the fabric to the Batten, "I used the vinaly side of the fabric because it looks easier to clean ".
The last step you need a hammer, a nail, in the last step you will take your Batten and a hammer, nail it on the fabric and match it with your previous Batten, nailed in the same way this one looks great
In a few weeks, I will take pictures of the quality of the camera's broken, and the webcam will not do the same.