ikea hack: mobile whiteboard - whiteboard on wheels

The mobile whiteboard is the whiteboard on the wheel.
I have a white Ikea Linnmon desk but I need a whiteboard.
I made some iron pipes later.
Material: all pipes are 3/4 "galvanized iron for home iron remover: paint your pipes according to your preference.
I chose gold for the joints and black for the pipes as these colors are well matched.
Use tape and Cork to prevent painting inside the pipe.
Measured twice before drilling.
Assemble the whiteboard back panel.
Consider the minor changes in the length of the pipe and mark the front and back accordingly.
Start drilling from the front.
Drilling from the back first may crack the whiteboard surface in a bad way.
After drilling each hole, check if the pipe is still aligned with the mark.
Place the whiteboard on the edge and securely secure the backrest with the cap.
Place the whiteboard in front of it and connect the 36 "pipe.
Place a stack of books under these pipes to raise the bottom and connect the feet.
Push the plastic socket into the elbow of the feet until comfortable.
It doesn't matter if some plastic is exposed.
Screw the wheel into the plastic socket and tighten it with a crescent wrench.
Put the whiteboard up.
If your whiteboard is unbalanced, this may be due to a change in the length of the pipe.
This can be explained by loosening the proper wheels. Enjoy. . .
After locking the wheel in place.